Garage Construction Tips
The place for car parking can be both in opened, and in the closed execution. It is more expedient to arrange it at ground level, but also the construction below earth level (for example, in building cellar) also is possible.
Garages can be wooden, metal, and collapsible of metal elements, brick, collected of ferro-concrete designs. Wooden garages don’t meet the requirements of fire-prevention safety; in metal garages there are no optimum conditions for the car: it is hot in the summer, in the winter and in the autumn the condensate that promotes process of corrosion of body of the car is formed. For the same reason metal gate in brick garage are recommended to be sheathed tree.
Our recommendations concern way of construction of the standardized modular garage from ferro-concrete elements at its assemblage manually.
Rod posts establish without the special base. Installation carries out as follows.
At erection of back wall of support establish in the poles dug in the earth, then gradually fill with their concrete of consistence 1:5 and densely stamp; as filler it is possible to apply available stone. That all support was identical height, it is recommended before their installation in one of poles to make concrete stopper, which will serve then as measure for definition of necessary height of mounted support. Wall panels stack from top to down between supports up to the necessary mark. On horizontal seams put cement mortal (1:2).
At erection of lateral walls installation is made the same as and at installation of back wall. Pay attention on careful making of binding elements.
The roof surface isn’t intended for walking there. If necessary to go on it, it is necessary to lay on it boards.
Putting the collar is made as follows. At first threshold of gate put on sandy hill (pay attention to horizontal position of lining), then wing of gate hang on crutches (holders). With the help of washers can achieve identical necessary height of suspension bracket.
At flooring of dry roof it is necessary, that the roof surface was pure and dry, its all roughness have been smoothed by means of cement mortal. Then on it are paste two layers of roofing material or glass-fiber plastic. It is recommended to lay panels in parallel roof ridge.
Processing of external surface of walls is reduced to additional protection. First of all it concerns stone laying.
Internal surfaces can be plastered (are painted by brush) the dissolved limy solution and then whitewashed. Processing of external walls should be executed according to buildings being nearby. If there are no special conditions it is possible to manage usual cement plaster, which throw with the help of device and rub clean. Then it can be painted and every 2-3 year to update painting.
Good luck and be patient during your building!
If you need car garage – this site will help. Lots of samples of car garage products and direct access to the car garage sellers. All contact info on the site.
P.S. And don’t let laziness to stop you from finding the best deal about car garages. Don’t forget that we are living in the world where information makes life easier.
Due to this if you are properly armed with the info in your topic you can rest assured that you will always find the solution to any bad situation. So, please make sure to visit this blog on a regular basis or – best of all – sign up to its RSS feed. In such an easy way you will have your hand on the pulse of the freshest informational updates here. Blogs can be helpful, you just need to understand how to use them.